Knife Lock Types – The Complete Guide

Knives are an essential tool for those who cook. They can be used anywhere from an outdoor adventure to chopping up vegetables, slicing meat, or even spreading butter on toast! However, all knives are not created equal. You must know the different types of knife locks to find the best one for your needs. This blog post will go over some different types of knife locks and help you determine which type is right for you!

Knife locks are used to secure your knife into its handle. You can also use a knife lock to store the blade safely without having it attached to the handle. Locking knives is especially important for safety reasons because this will prevent children from getting hurt by accidentally picking up an unlocked kitchen utensil and injuring themselves on the blade.

Compression Lock

The compression lock is used on smaller pocket knives. It resembles a switchblade release because the blade springs out when you push down on it with one hand. The difference between this type of knife and the switchblade is that this does not have to be operated by any buttons or switches. All you need to do is press your thumb firmly against the back edge of the handle, where there will usually be some kind of dimple located, therefore activating the spring-loaded mechanism. Although these are easier for children to operate than other locks since they only require one hand, they can still pose dangers if not handled properly! Always make sure that an adult has taught their child how to use this type before giving them access to it.

Frame Lock

The frame lock is seen on many folding knives. This type of knife typically has two handle halves that are attached by the blade’s tang (the metal piece within the handle). One side contains a spring-loaded lever inside its cavity while the other does not, creating an L shape when closed. When you open up your knife, this will cause it to push against the flat surface area where there isn’t any part of itself; in turn, pushing out and locking into place until you let go! The best thing about this particular lock is that it cannot be opened with just one hand like some others can because both sides need to move simultaneously to work correctly. It also protects children from accidentally opening it since they will not be able to access the release button.

This type of lock can be found on quality pocket knives. This one differs from the liner in that it only consists of one side instead of both! The blade is attached to its handle with a single solid piece that forms an integral part right underneath your release button, where you place your index finger for grip. When closed properly, there should be no space between your handle and blade whatsoever because both ends are bent perfectly up against each other, preventing them from moving without enough pressure being applied by you first! It’s best to make sure this particular design doesn’t get too much dirt, or debris stuck inside since it will cause problems when trying to open up the knife later on down the road.

Back Lock

The back lock is found on many larger knives, such as tactical or rescue knives. This type of knife often has a notch located at the rear end of its blade, where you can rest your thumb while maintaining proper control over it with one hand. Instead of having an actual locking mechanism for this purpose like some other locks do, the tang itself does all of the work! When closed properly, there should be no space between your handle and blade whatsoever because both ends are bent perfectly up against each other, preventing them from moving without enough pressure being applied by you first! The best thing about this particular design is that most people cannot accidentally open up the blade without knowing exactly what they’re doing because it requires a lot of pressure to pull outwards.

Liner Lock

The liner lock is commonly found on folding pocket knives, such as box cutters or switchblades. The difference between this type and others like it is that there are two separate pieces instead of just one, typically consisting of both halves of your handle (one with the release button in its cavity) and plate where your locking mechanism lies underneath the spring! This design makes for an efficient knife since you can open up the blade easily while simultaneously keeping protection against accidental openings by children or anyone else that might pick it up. It should appear similar to the frame lock but may be more difficult to disengage.

Axis Lock

Next, we have the axis lock, which is commonly found on quality folding knives like balisongs or butterfly knives since it requires a lot of strength to use when you’re in motion! This one has an actual metal bar that must be pushed forward before your blade will even budge, making it very secure against accidental openings while also preventing too much dirt from getting inside when closing up. The way this works is that there’s usually a hole located just behind where your blade and handle connect for you to insert something into (like a screwdriver) so that you can pull together any two pieces around its circumference until they click securely into place at full potential without having to apply pressure by hand anymore! These are typically the strongest type of knife lock available because there’s less that can go wrong with it, but they do take some getting used to when you first start practicing your balisong moves.

Fixed Bearing

The fixed bearing is another kind of knife lock found on pocket knives and switchblades alike! The best thing about this particular design is that most people cannot accidentally open up the blade without knowing exactly what they’re doing because it requires a lot of pressure to pull outwards. It should appear similar to the frame lock. Still, it may be more difficult to disengage due to its smaller size, making it perfect for those who are looking for something compact yet secure enough not to worry too much about safety precautions while carrying around their pocket knife.

Locking Lever

The locking lever is another common type of knife lock that can be found on many types of knives like the balisong and switchblade! This one has a metal bar located near where your blade meets its handle that must be pushed down before you’re able to open up the folding mechanism, making it very secure against accidental openings while also preventing too much dirt from getting inside when closing up as well. There’s usually an opening somewhere around this area for you to stick something into (like a screwdriver) so that you can pull together any two pieces around its circumference until they click securely into place at full potential without having to apply pressure by hand anymore, just like with the Axis Lock design mentioned above. The only downside to this particular knife lock is that it can get a little difficult to disengage if something goes wrong while you’re trying to open up the blade, but once you get used to using it properly, it shouldn’t be much of an issue!

Sliding Knife Lock

The sliding knife lock is another common type of knife lock found on pocket knives and switchblades alike, usually smaller than what’s mentioned above. This one differs from the other types because instead of having a metal bar or lever for opening, there’s actually a small button somewhere along where your handle meets your blade that must be pushed forward before anything will happen at all! It doesn’t require as much strength either, which makes it perfect for those looking to carry around a pocket knife with them but still want the option of opening it up without too much hassle. This makes it very secure against accidental openings while also preventing too much dirt from getting inside when closing up as well, just like all the other types mentioned above!

Button Lock

The button lock is another common type of knife lock found on many types of pocket knives and switchblades alike, usually stronger than other designs due to its location inside where your blade meets your handle (instead of near where your handle meets the blade-like most others).

Pivot Bearing

The pivot bearing is another common type of knife lock found on many types of pocket knives and switchblades alike, usually being stronger than most others due to its location within the body (instead of near where your blade meets the handle like most others). The way these particular design works is that there’s actually a small bearing somewhere along where your handle and blade meet, which must be pushed forward before you’re able to open up the folding mechanism; making it one of the strongest out there since it made entirely from steel, unlike most others which only have a metal bar or lever for opening. This type of knife lock also requires less strength than what’s mentioned above, so you don’t really need to worry about hurting yourself while trying to get it open, making it perfect for people to carry with them.